-
-
- Battery Chargers, Battery Chargers / Jump Starters
SCHUMACHER 6V/12V 8-BANK AUTOMATIC BATTERY CHARGING STATION (DSR127)
- CHARGE 8 DIFFERENT BATTERIES AT THE SAME TIME This unit is safe and smart with each bank being completely automatic with a microprocessor to prevent overcharging, reverse polarity and short circuits. Revive severely discharged 12V batteries with…
-
-
-
-
-
- Battery Chargers
Schumacher Fully Automatic Battery Charger and Maintainer – 10 Amp 12V (SC1339)
- Meeting the highest industry energy efficiency standards, the SC1339, a 10-amp, 12-volt battery charger, is perfect for most charging applications. Its fully automatic and multi-stage charging is microprocessor-controlled, adjusting the amperage rate to better maintain the battery.…
-
-
-
-
- Battery Chargers, Battery Chargers / Jump Starters
Schumacher Fully Automatic Direct-Mount 3-Battery Charger and Maintainer – 15 Amp, 12V – for Marine Batteries (SC1389)
- $0.00
- When out on the water, the last thing mariners want to deal with is a dead battery. The SC1389 from Schumacher Electric is ideal for marine deep-cycle boat batteries, keeping boats charged when sailors need it the…
-
-
-
-
- Automotive Equipment, Automotive Tools
Self Adjusting Clutch Alignment Setting Tool Set (9AK21)
- Allows operations on clutch equipped with this device in order to prevent any damage to system and to keep adapter ring in right position Necessary for pre-tensioning self adjusting clutches before removal or installation avoiding clutch deformation…
-
-
-
-
-
- Vacuums
SHOP-VAC 16 GALLON STAINLESS STEEL WET/DRY VACUUM
- Lock-on inlet Large drain tank Rear blower port 2.5" x 8' hose floor nozzle utility nozzle crevice tool collection bag 2 extension wands cartridge filter foam sleeve
-
-
-
-
-
- Power Tools, Vacuums
SHOP-VAC® 6 GALLON 3.5 PEAK HP WET/DRY VACUUM
- Lock-On® Hose Blower Feature Dolly Tool Storage Gulper Nozzle Crevice Tool Floor Nozzle Foam Sleeve Nanofiber Cartridge Filter 5-8 Gallon High Efficiency Disposable Filter Bag
-
-
-
-
-
- Vacuums
SHOP-VAC® 8 GALLON 6.0 PEAK HP INDUSTRIAL WET/DRY VACUUM
- 8-foot Lock-On® Hose Two 1.5-inch Diameter Extension Wands 12-inch Floor Nozzle 6-inch Utility Nozzle Crevice Tool Round Brush Tool Storage Basket Cartridge Filter Foam Sleeve 5-8 Gallon* High Efficiency Disposable Filter Bag
-
-
-
-
-
- Chop Saws, Saws
SIEFKEN 14″ CHOPSAW CD3525
- Compact 2,500W 4,000 Rpm resin motor with protective winding coating, ideal for heavy duty and extended life. Quick adjustment table press for (- 45 ° + 45 °). Quick jaw press to quickly fix the workpiece to…
-
-
-
-
-
- Angle Grinders
SIEFKEN CORDLESS 4-1/2″ ANGLE GRINDER
- Brushless tool for greater power, life and maintenance-free carbons. Excellent autonomy in the most demanding jobs. Versatile tool for different types of cutting and roughing. Lithium Ion battery that allows more charges and longer operating…
-
-
-
-
-
- Cordless Drills, Drills
Siefken cordless impact drill (SBS001)
- Technical specifications; • Motor: Brushless tech motor • Voltage: 20V • Battery: 4000AH Li-ion • Mandrel size: ½”-13mm • Speed: 0-500 And 0-1800 RPM • Blows per minute: 0-8000 And 0-28000BPM • Led Work Light
-
-
-
-
-
- Demolition Hammers
SIEFKEN DEMOLITION HAMMER 1-1/8″ HEX (SD75)
- CHARACTERISTICS: SCHOCK DÄMON integrates a hardened hitting mast generating strokes of up to 75 Joules and 950 strokes per minute (EPTA Approved). Hexagonal chuck type. AVR System (Integrated Vibration Reduction System) reduces its vibration and impact rate to…
-
-
-
-
-
- Demolition Hammers, Power Tools
SIEFKEN DEMOLITION HAMMER (SD15)
- FEATURES: SDS Max LUFTEK rotary hammer, greater cylinder travel with a large air chamber that improves the multiplication of impact power. Anti-vibration system, reduces operator fatigue in long-term jobs. Ergonomic handle and lock switch with soft grip.…
-
-
-
-
- Demolition Hammers
SIEFKEN DEMOLITION HAMMER (SD25)
- Features: •Powerful motor with 1,500W and 25 Joules of individual blow power. •The pneumatic percussion mechanism generates blows with an extremely high impact energy with almost no clamping pressure. •Aluminum alloy housing that withstands high mechanical loads.…
-
-
-
-
- Demolition Hammers, Power Tools
SIEFKEN DEMOLITION HAMMER (SD28)
- FEATURES: Chiseled angle adjustable by 12-step locking; which allows you to adapt it to each work situation. Anti-vibration system, to reduce operator fatigue. Switch lock and ergonomic handle with soft grip. 6-step adjustment wheel and constant speed…
-
-
-
-
- Demolition Hammers
SIEFKEN DEMOLITION HAMMER (SD55)
- Powerful motor with 1,700W and 55 Joules of energy of individual blow (according to EPTA). Optimal combination of weight and devastating power. When hard materials such as stone or concrete must be treated. The pneumatic percussion mechanism generates blows…
-
-
-
-
- Demolition Hammers
SIEFKEN DEMOLITION HAMMER (SD58)
- 19 Kg and socket (1.1 / 8´´) HEX 28mm. 58 JOULES of impact energy. 1,600 Watts and an impact rate of 1,450 Bpm. Vibration of 5.0m / s in chiselled concrete. HEX 28mm double function insert. 360 ° auxiliary…
-
-
-
-
-
- Demolition Hammers, Power Tools
SIEFKEN DEMOLITION HAMMER (SD65)
- FEATURES: LUFTEK wrecker greater cylinder travel with a large air chamber that improves the multiplication of impact power. 29Kg and insert (1.1/8") HEX 28mm. 65 JOULES of impact energy. 2,000 Watts and an impact rate of 1,000…
-
-
-
-
- Rotary Hammer Drill
SIEFKEN ROTARY HAMMER SD4814
- SDS Max chuck system. 2 types of work: Rotary hammer / Demolisher Chisel adjustable to 12 different angles. LED indicator of electric overload / LED indicator of change of brushes, for easy diagnosis of preventive maintenance. Variable…
-
-
-
-
-
- Hammer Drills
SIEFKEN SD1370 HAMMER DRILL
- The best features for DIY and construction jobs. Variable drilling speed for a wide range of materials. Equipped with safety brushes that stop the equipment automatically when detecting wear on the coals. Magnesium composite technology, metal housing…
-
-
-
-
- Rotary Hammer Drill
SIEFKEN SD2604 ROTARY HAMMER
- CHARACTERISTICS: The most compact and powerful rotary hammer in its class. Vibration of 11.4 m / s in drilling and 10.4 m / s in chiselling. 750W motor combined with optimal high performance drilling speed. Selector wheel on…
-
-
-
-
-
- Drills, Rotary Hammer Drill
SIEFKEN SD3009 ROTARY HAMMER DRILL SDS PLUS
- CHARACTERISTICS: SDS Plus system. SCHOCK DÄMON (Patented system) with mechanical safety clutch; automatic stop of the equipment during jamming of the bit, protects the operator and the machine. It integrates a hardened striking neck that generates blows of…
-
-
-
-
-
-
- Hydraulic Cylinders, Hydraulics
SIMPLEX 10 TON 6″ HYDRAULIC CYLINDER (R106)
- FEATURES: Single acting with heavy-duty internal retraction spring Solid and plated piston resists scoring & corrosion Heat treated grooved saddles are provided as standard Stop ring limits piston travel at the end of the stroke to prevent…
-
-
-
-
-
- Hydraulic Cylinders, Hydraulics
SIMPLEX 100 TON HYDRAULIC CYLINDER (RFS100)
- Simplex RFS Series Flat Jack Hydraulic Cylinders engineered to apply hydraulic force in the tightest spaces. The powerful return spring boosts efficiency by quickly returning the plated plunger to its starting position, and the cylinder exterior is…
-
-
-
-
-
- Hydraulic Cylinders, Hydraulics
SIMPLEX 20 TON 2″ HYDRAULIC CYLINDER (RC202A)
- FEATURES: Induction hardened piston rod for added strength eliminates the need for a saddle Collar threads for easy fixing of components Hollow plunger design allows for both push & pull forces Large center hole for greater flexibility…
-
-
-
-
- Hydraulic Cylinders, Hydraulics
SIMPLEX 30 TON 2.5″ HYDRAULIC CYLINDER (RC302A)
- Induction hardened piston rod for added strength eliminates the need for a saddle Collar threads for easy fixing of components Hollow plunger design allows for both push & pull forces Large center hole for greater flexibility Heavy…
-
-
-
-
- Hydraulic Cylinders, Hydraulics
SIMPLEX 30 TON 8.25″ HYDRAULIC CYLINDER (R308)
- Single acting with heavy-duty internal retraction spring Solid and plated piston resists scoring & corrosion Heat treated grooved saddles are provided as standard Stop ring limits piston travel at the end of the stroke to prevent blow-out…
-
-
-
-
- Hydraulic Cylinders, Hydraulics
SIMPLEX 50 TON HYDRAULIC CYLINDER (RLS502)
- FEATURES: Compact low-profile design HD spring for fast retraction Grooved plunger to stabilize the load Stop ring for piston blow-out protection Rod wiper protects inner cylinder from dirt Plated piston to resist scoring & corrosion
-
-
-
-
- Hand Pumps, Hydraulics
SIMPLEX HYDRAULIC HAND PUMP (P42)
- Large 3/8" pressure port for maximum flow Low handle effort for easy operation Two-speed operation for fast and easy operation Carrying handle for easy transport Chrome plated plunger and wiper system for durable, long lasting performance
-
-
-
-
-
- Hand Pumps, Hydraulics
SIMPLEX HYDRAULIC HAND PUMP (P82)
- Large 3/8" pressure port for maximum flow. Low handle effort for easy operation. Two-speed operation for fast and easy operation. Carrying handle for easy transport. Chrome plated plunger and wiper system for durable, long lasting performance.
-
-
-
-
- Barrel Pumps, Fluid Handling & Lubrication
SIPHON PUMP (SPH/2)
- Polyethylene pumps siphon liquids to lower levels than the height at which the pump is installed. These are easy to prime & start within 6-7 strokes. Pump requires no further operation & keeps working in auto position.…
-
-
-
-
- Welding Machines
SKYARC 2050 FX
- $4,547.00
- Makes easier to START the ARC, preheating the rod. Improves the ARC STABILITY, and prevents the rod from sticking. If the rod sticks, the machine will stop the power, so it can start again easily. Makes easier the start of…
-
-
-
- Out of Stock
- Welding, Welding Machines
SKYARC 2050 FX TITANIUM (SWA2054)
- New and exclusive SWEISS technology, which converts any MMA device with WELD360 technology into a multi-process MIG / MAG, MMA and TIG LIFT equipment (optional accessories may be required). An equipment design to give the best results…
-
-
-
-
-
-
-
-
- Welding Machines
SKYMAX 1550 MMA/TIG Welding Plant
- Designed to offer the best benefits in 220V and 110V, with 155 amps with TIG LIFT ARC. Ideal for maintenance or professional jobs until 5/32 (4.0 mm). Able to weld most of the rods like 6013,7018,6010,6011.
-
-
-
-
- Welding, Welding Machines
SKYTIG 2035 AC/DC WELDING PLANT
- $11,508.00
- Connection 95 - 270V 200 Amp TIG HF - AC/DC MMA A machine design for the most demanding welders, with its 10 initial amps, AC and DC current with a high frequency start (HF) allow to weld…
-
-
-
-
- Welding, Welding Machines
SKYTIG 2045 AC / DC (SWT2045)
- An equipment designed for the most demanding welder, excellent for TIG ALUMINUM, with its initial 10 Amps, AC and DC current together with high frequency (HF) starting, allows welding on all types of materials. Push button up to 250 Hz in…
-
-
-
-
- Machine Shop, Precision Tools
STARRETT DIAL INDICATOR (656-441J)
- Starrett Dial Indicators have a shockless, hardened steel gear train and jewel bearings. Features include a lug-on-center back. Balanced and tapered hands are easy to follow. This model features a 1.00" Measuring Range. If lift lever is…
-
-
-
-
- Machine Shop, Precision Tools
STARRETT ELECTRONIC CALIPER (799AZ-24/600)
- The Starrett 799 Series Electronic Caliper is light, comfortable, easy-to-use, and constructed with features that have made Starrett slide calipers the machinist\u0027s first choice for many years. The 799 offers a slim, streamlined profile, a large, clear,…
-
-
-
-
- Machine Shop, Precision Tools
STARRETT ELECTRONIC CALIPER (EC799A-6/150)
- The Starrett EC799 Series Electronic Caliper is constructed with features that have made Starrett slide calipers the machinist's first choice for many years. The EC799 offers a slim, streamlined profile, a large, clear, LCD display, long battery…
-
-
-
-
-
- Machine Shop, Precision Tools
STARRETT ELECTRONIC CALIPER (EC799A-8/200)
- The Starrett EC799 Series Electronic Caliper is constructed with features that have made Starrett slide calipers the machinist's first choice. The EC799 offers a slim, streamlined profile, a large, clear, easy-to-read LCD display, long battery life and…
-
-
-
-
- Machine Shop, Precision Tools
STARRETT ELECTRONIC DEPTH GAUGE (3753A-8/200)
- The Starrett 3753A Electronic Depth Gage is engineered for a high level of accuracy and long service life. This unit measures depths up to 8" (200mm). Additional ranges are also available in the Starrett catalog range. Hardened…
-
-
-
Providing Solutions Through Technology
Contact Us
(868) 223-6493 || (868) 650-4477
11-12 Harmony Hall Road, Gasparillo, Trinidad & Tobago
COMPANY
©2025 Khanico Limited Ltd. All Rights Reserved.
