Filter
  • 0.5T HEAVY DUTY TRANSMISSION JACK (STAE5822) Quick View
  • 0.5T TRANSMISSION JACK (STAE5821)0.5T TRANSMISSION JACK (STAE5821) Quick View
  • 120 PC TOOL SET (ST09014)120 PC TOOL SET (ST09014) Quick View
  • 2 Post Lift (EURO Spec) (STAE5151) Quick View
    • 2 Post Lift (EURO Spec) (STAE5151) Quick View
    • ,

    • 2 Post Lift (EURO Spec) (STAE5151)

    • $32,000.00
    • ◆ With 3-section straight support arm design, it is applicable to a wider range ◆ Integrated control of PCB circuit board, beautiful and elegant, efficient and stable ◆ The column and the support arm are made of high-strength materials, the whole machine has high strength, safe and reliable ◆ Cylinder upper limit protection, protect hydraulic system, reduce noise ◆ Straight top sliding table of oil cylinder avoids the risk of chain break ◆ Aluminum alloy with fan motor, strong heat dissipation capacity ◆ Integrated circuit board control, stable and reliable
  • 2 Post Lift (US Spec) (STAE5101)2 Post Lift (US Spec) (STAE5101) Quick View
    • 2 Post Lift (US Spec) (STAE5101)2 Post Lift (US Spec) (STAE5101) Quick View
    • ,

    • 2 Post Lift (US Spec) (STAE5101)

    • $34,855.00
    • FEATURES: • Developed based on American ALI (Automotive Lifts Institute), guaranteeing 1.5 times the nominal capacity without deformation • Column with high quality material, Q235B steel, with thickness of 6mm • Hydraulic lifting system: Low noise and maintenance • Arms with steel material Q345B and thickness of 6mm, very high strength and durability • Mechanical synchronization in 2 columns avoiding unevenness • Asymmetrical arms with 2 and 3 stages and opening angle of 90 °allowing the use in more models of vehicles. • Double mechanical locking system on the posts increasing safety • Rubber protection to avoid hitting the doors • Automatic limit switch to increase hydraulic cylinder durability • Economical lifting…
  • 2T Engine Crane/ Cherry Picker (STAE5841)2T Engine Crane/ Cherry Picker (STAE5841) Quick View
  • 3D Four Wheel Aligner (STAE5602)3D Four Wheel Aligner (STAE5602) Quick View
    • Out of Stock
      3D Four Wheel Aligner (STAE5602)3D Four Wheel Aligner (STAE5602) Quick View
    • ,

    • 3D Four Wheel Aligner (STAE5602)

    • Features State-of-the-art high-resolution cameras with high-intensity LEDs that increase reading accuracy 32-inch TV monitor for easy viewing during operation Armored Targets with protection system that increases durability and resistance Indicator arrows near the camera that make it easy to see the test step 3 upper bar height adjustments that allow installation in different types of workshop Targets of the same size can be installed on any wheel Integrated printer, which generates re­ports with test results Voice system that indicates the test steps that are performed Advanced, reliable database with over 20,000 alignment records Manual entry into the database of new cars according to the operator’s needs The only 3D aligner that brings…
  • 3T SCISSOR LIFT ULTRA-THIN (STAE5503) Quick View
    • Out of Stock
      3T SCISSOR LIFT ULTRA-THIN (STAE5503) Quick View
    • ,

    • 3T SCISSOR LIFT ULTRA-THIN (STAE5503)

    • $42,000.00
    • Features Manufactured with high quality Q345B steel material which increases durability, achieving a safety parameter of 1.5 times nominal capacity without deformation Platform with thickness of 6mm which increases the strength and safety of the lift Installation on the floor with minimum height of 110mm leaving wheels and doors of vehicles free Hydraulic system with 4 pistons interconnected ensuring the synchroni­zation of the platforms Larger platforms with 660mm guaranteeing greater stability Extenders at the ends of the platforms reaching the maximum length of 1988mm and allowing the use in longer vehicles
  • 53PC ELECTRONIC TOOL SET (ST09535)53PC ELECTRONIC TOOL SET (ST09535) Quick View
  • OIL EXTRACTOR (STAE5702) Quick View
    • Out of Stock
      OIL EXTRACTOR (STAE5702) Quick View

    • OIL EXTRACTOR (STAE5702)

    • Storage tank with a capacity of 70 liters • 5 suction probes with quick coupling for different models of vehicles • Fast pressurizing system - only 4 minutes • Portable - No need to work connected to the air source • Productivity - Maximum collection speed of 3 l / min • Advanced sealing system - after pressurizing, the system remains • with little pressure change for more than 36 hours. • Maximum system pressure of 0.85 bar, which increases the speed of • oil extraction • High-pressure relief valve, which provides greater operator safety • Two-stage height adjustment for oil change by gravity • Self-emptying tank system that ensures more agility…
  • Oil Extractor With Measuring Glass (STAE5701) Quick View
    • Oil Extractor With Measuring Glass (STAE5701) Quick View
    • ,

    • Oil Extractor With Measuring Glass (STAE5701)

    • $3,543.00
    • Features Storage tank with capacity of 70 liters and with level indicator 5 suction probes with quick coupling for different vehicle models Oil inspection chamber with capacity for 10 liters Fast pressurizing system, only 4 minutes Portable - No need to connect compressed air source after pressurizing Ability to extract up to 50 liters of oil continuously Productivity - Maximum collection speed of 3 l / min Advanced sealing system, after pressurizing, the system remains with little change of pressure for more than 36 hours Maximum system pressure of 0.85 bar increasing the oil extraction speed Special design of the inspection chamber with two pressure stabilization tubes between the tank and the…
  • SATA 15PC ENG SOCKET SET 3/4DR (ST09148) Quick View
  • SATA 70pcs Cantilever Mechanic Tool Chest (ST95104A-70)SATA 70pcs Cantilever Mechanic Tool Chest (ST95104A-70) Quick View
  • SATA RATCHETING SCREWDRIVER SET (ST09341)SATA RATCHETING SCREWDRIVER SET (ST09341) Quick View
  • SATA15 Pc. 3/4″ Drive 12 Point Metric Socket Set (ST09015) Quick View
  • Tilt-Tower Tire Changer (STAE1022H) Quick View
    • Tilt-Tower Tire Changer (STAE1022H) Quick View
    • ,

    • Tilt-Tower Tire Changer (STAE1022H)

    • $34,185.00
    • ◆ Larger rubber pads for breaking tires of larger sizes ◆ Low box design with reinforcement ribs inside, with high strength and deformation resistance ◆ Lifting auxiliary arm with plain bearings, featuring low friction and no vibration ◆ Unique (3+1) pedals design, avoiding interference and mis-operation ◆ Large aluminum alloy cylinder with stainless steel two-touch joint, always protecting the cylinder barrel from rusting
  • TIRE CHANGER (STAE1021) Quick View
    • Out of Stock
      TIRE CHANGER (STAE1021) Quick View

    • TIRE CHANGER (STAE1021)

    • ◆ Step pedal, enabling stop at any position ◆ Bead breaker designed with stopper on the back, preventing the bead breaker from being stuck ◆ Larger rubber pads for breaking tires of larger sizes
  • WHEEL BALANCER (STAE2016)WHEEL BALANCER (STAE2016) Quick View
    • WHEEL BALANCER (STAE2016)WHEEL BALANCER (STAE2016) Quick View

    • WHEEL BALANCER (STAE2016)

    • $25,760.00
    • ◆ Specially designed balancing machine with high accuracy and strong stability, suitable for large diameter and widened tires ◆ Italian software, imported components and circuit boards, advanced design ◆ LED operation display screen; automatically measure input distance and rim diameter parameters and rim width, realize 3 sets of data automatic measurement input ◆ 7 kinds of aluminum alloy rim balance mode, 2 kinds of custom balance mode, motorcycle balance mode (need to be equipped with vehicle fixture), off-road vehicle balance mode ◆ Automatic positioning supplemented by electromagnetic brake ◆ Energy saving mode, the machine will automatically sleep after 5 minutes of inactivity ◆ Wheel rim optimized matching mode; unbalanced amount decomposition hidden…